This site uses cookies and other website monitoring technologies to assist with website functions and with our promotional and marketing efforts. By clicking Accept, you consent to the terms in our recently updated Privacy Notice and Policy Manual.
Accept Decline

Power/Signal Systems

High power/signal combination board-to-board systems up to 60 A, in vertical and right-angle orientations with high-density power blades and small form factor designs.


Signal/Power Edge Rate® ComboSignal/Power Edge Rate® Combo Edge Card System

Combination signal and power edge card system with rugged Edge Rate® contacts and performance up to 60 A per power bank.

Features
  • Power blades rated up to 60 A per power bank
  • Rugged Edge Rate® contact system
  • Accepts 1.60mm (.062") thick cards
  • Available with 40, 60 and 80 signal pins
  • Choice of 2 or 4 power banks
  • Optional weld tab for mechanical strength
Series
V
  • HSEC8-PV
Signal/Power Edge Rate® Combo

Power / Q2™ Signal ComboPower / Q2™ Signal Combo

Q2™ power and signal combination interconnects with integral ground plane.

Features
  • Current Rating: 2.7A per power pin
  • High-speed Q2™ contacts with power end option
  • Vertical and right-angle orientations
  • Up to 8 power pins per end as an application specific option
  • Optional shielding
  • Stack Height: 10.00 mm and 11.00 mm
  • Contacts: Up to 156 signals, up to 4 power per end
Series
V
  • HPFC
  • HPMC
  • PCS2
  • PCT2
  • QFS
  • QMS
Power / Q2™ Signal Combo

PowerStrip™PowerStrip™

PowerStrip™/30 and PowerStrip™/40 combination signal and power systems.

Features
  • Performance up to 31.4 A per power blade
  • Up to 8 power blades and 80 signal pins
  • High-power dual blade contact system
  • Rugged screw down and locking clip options
Series
V
  • MPSC
  • MPTC
  • PESC
  • PETC
PowerStrip™

Ultra Micro PowerUltra Micro Power Connector Systems

Micro 2.00 mm pitch power blade interconnects designed for staging a combination power and signal/ground solution.

Features
  • Design flexibility as a power-only system or a two-piece system for power/signal applications
  • Use with Samtec’s high-speed connector systems for a power/signal solution
  • 5 mm to 20 mm stack heights
  • Up to 15 A per blade
  • 2 – 5 power blades on a 2.00 mm pitch
Series
V
  • UMPS
  • UMPT
Ultra Micro Power

EXTreme Ten60Power™EXTreme Ten60Power™

A 60 Amp modular high power and signal combo connector system for coplanar and right-angle board-to-board applications. Designed as a high-current and lower profile interconnect than existing connectors, EXTreme Ten60Power™ interconnects provide maximum current-to-length ratio packaged in a low 10 mm height housing that enhances airflow within the system.

Features
  • Performance up to 60 A per power blade
  • Rugged 10 mm low profile design (right-angle orientation)
  • 3 or 5 signal rows in the same form factor
  • Available with 0 to 40 signal pins
  • Up to 20 total DC power blades or 12 total AC power blades
  • AC-DC power combos and split power options available
  • Press-fit tails option for ease of board termination (ET60S only)
  • Modules can be configured to accommodate most any design
  • For coplanar or perpendicular applications
  • Hot plug option available
  • Dual sourced by Molex®
Series
V
  • ET60S
  • ET60T
EXTreme Ten60Power™

EXTreme LPHPower™EXTreme LPHPower™

High-power, low profile system.

Features
  • Performance up to 30 A per power blade
  • Extremely low 7.50 mm profile (right-angle)
  • Double stacked power blades for high-density
  • Socket mates with standard .062" (1.60 mm) PCB card
Series
V
  • LPHS
  • LPHT
EXTreme LPHPower™

It’s been over a year since we last updated the Samtec homepage. As you may have already noticed, we recently took some time to refresh it. You can see a comparison below of the old homepage (top), vs the new homepage (bottom). The new update puts more attention on our high speed...
If you manufacture overseas and ship into the U.S.A, you may have a longer waiting time in Customs than you would prefer.  Some of this waiting time could be eliminated by becoming part of the Customs Trade Partnership Against Terrorism (C-TPAT), one layer of the U.S. Customs and...
Just about everybody wishes they had more time to pursue a hobby or a side project.  Some aspire to be painters or furniture makers.  Others like to rebuild cars.  Even others enjoy electronics in any form. The Maker Movement attracts and caters to tinkerers, hobbyists, students ...
Demand For High Data Rate As the need for bandwidth continues to increase, so does the need for higher data rates within a system. What was once one to three Gbps, then moved to 4 to 8 Gbps, and now we are approaching 28 Gbps and looking forward to 56 G. This trend was recently [...
Samtec is pleased to announce the new Silicon-to-Silicon Application Solutions Guide. This updated guide details the evolution of Samtec technologies, products and technical support available for next-gen system data rates. 56 Gbps PAM4. 56 Gbps NRZ. 112 Gbps PAM4. Whatever the d...
View Full Site