This site uses cookies and other website monitoring technologies to assist with website functions and with our promotional and marketing efforts. By clicking Accept, you consent to the terms in our recently updated Privacy Notice and Policy Manual.
Accept Decline

Power Systems

High-power interconnects up to 60 A, available in small form factors and elevated designs with power blades or individually shrouded power pins.


Power Mate® and Mini Mate® SystemsPower Mate® and Mini Mate® Systems

Board-to-board power socket and terminal strips with individually shrouded contacts.

Features
  • Power Mate® system with polarized guide posts
  • Mini Mate® system with reliable Tiger Buy™ contacts
  • Individually shrouded contacts
  • Elevated stack heights
Series
V
  • IPBS
  • IPBT
  • IPS1
  • IPT1
Power Mate® and Mini Mate® Systems

Flexible Power Stacking SystemsFlexible Power Stacking Systems

Standard and high-temp connector strips with Power Eye contacts for applications up to 15 A per pin.

Features
  • Three-finger BeCu power eye contact
  • Flexible stack heights and pin counts
  • Standard and high-temp systems
  • Rugged locking clip option
Series
V
  • FHP
  • FWJ
  • HFWJ
  • HPF
  • HPM
  • HPW
  • JW
Flexible Power Stacking Systems

PowerStrip™ High-Power SystemsPowerStrip™ High-Power Systems

High-power systems for performance up to 58.7 A per contact.

Features
  • Current Rating: 23 A - 58.7 A per power blade
  • Right-angle and vertical orientations
  • Power/Signal combos available
  • Cable assemblies available
  • "Hinged" for unique mating in any orientation from 0° to 90° and space confined applications
  • Optional locking clips or screw downs
  • Ideal for blind mating
  • Space saving
  • Up to 10 total power blades
Series
V
  • FMPS
  • FMPT
  • MPPT
  • MPS
  • MPT
  • PES
  • PET
  • UPPT
  • UPS
  • UPT
PowerStrip™ High-Power Systems

Ultra Micro PowerUltra Micro Power Connector Systems

Micro 2.00 mm pitch power blade interconnects designed for staging a combination power and signal/ground solution.

Features
  • Design flexibility as a power-only system or a two-piece system for power/signal applications
  • Use with Samtec’s high-speed connector systems for a power/signal solution
  • 5 mm to 20 mm stack heights
  • Up to 15 A per blade
  • 2 – 5 power blades on a 2.00 mm pitch
Series
V
  • UMPS
  • UMPT
Ultra Micro Power

EXTreme Ten60Power™EXTreme Ten60Power™

A 60 Amp modular high power and signal combo connector system for coplanar and right-angle board-to-board applications. Designed as a high-current and lower profile interconnect than existing connectors, EXTreme Ten60Power™ interconnects provide maximum current-to-length ratio packaged in a low 10 mm height housing that enhances airflow within the system.

Features
  • Performance up to 60 A per power blade
  • Rugged 10 mm low profile design (right-angle orientation)
  • 3 or 5 signal rows in the same form factor
  • Available with 0 to 40 signal pins
  • Up to 20 total DC power blades or 12 total AC power blades
  • AC-DC power combos and split power options available
  • Press-fit tails option for ease of board termination (ET60S only)
  • Modules can be configured to accommodate most any design
  • For coplanar or perpendicular applications
  • Hot plug option available
  • Dual sourced by Molex®
Series
V
  • ET60S
  • ET60T
EXTreme Ten60Power™

EXTreme LPHPower™EXTreme LPHPower™

High-power, low profile system.

Features
  • Performance up to 30 A per power blade
  • Extremely low 7.50 mm profile (right-angle)
  • Double stacked power blades for high-density
  • Socket mates with standard .062" (1.60 mm) PCB card
Series
V
  • LPHS
  • LPHT
EXTreme LPHPower™

It’s been over a year since we last updated the Samtec homepage. As you may have already noticed, we recently took some time to refresh it. You can see a comparison below of the old homepage (top), vs the new homepage (bottom). The new update puts more attention on our high speed...
If you manufacture overseas and ship into the U.S.A, you may have a longer waiting time in Customs than you would prefer.  Some of this waiting time could be eliminated by becoming part of the Customs Trade Partnership Against Terrorism (C-TPAT), one layer of the U.S. Customs and...
Just about everybody wishes they had more time to pursue a hobby or a side project.  Some aspire to be painters or furniture makers.  Others like to rebuild cars.  Even others enjoy electronics in any form. The Maker Movement attracts and caters to tinkerers, hobbyists, students ...
Demand For High Data Rate As the need for bandwidth continues to increase, so does the need for higher data rates within a system. What was once one to three Gbps, then moved to 4 to 8 Gbps, and now we are approaching 28 Gbps and looking forward to 56 G. This trend was recently [...
Samtec is pleased to announce the new Silicon-to-Silicon Application Solutions Guide. This updated guide details the evolution of Samtec technologies, products and technical support available for next-gen system data rates. 56 Gbps PAM4. 56 Gbps NRZ. 112 Gbps PAM4. Whatever the d...
View Full Site