Edge Card Connector Systems

High-speed edge card interconnects on choice of 0.50 mm, 0.635 mm, 0.80 mm, 1.00 mm, 1.27 mm or 2.00 mm pitch and a variety of orientations.

High-Speed Card Systems

High-Speed Card Systems

High-speed edge card sockets in vertical, right-angle, and edge mount designs with choice of 0.50 mm, 0.635 mm, 0.80 mm, 1.00 mm, 1.27 mm and 2.00 mm pitch.


High-Speed (0.80 mm) Pitch Edge CardHigh-Speed (0.80 mm) Pitch Edge Card

High-speed edge card sockets with rugged Edge Rate® contacts.

Features
  • Performance: Up to 18.5 GHz / 37 Gbps
  • Rugged Edge Rate® contacts
  • Card slot: 1.60 mm (.062")
  • Single-ended and differential pairs
  • Vertical, right-angle, edge mount
  • Optional board locks and cable latching features
  • Optional weld tab for mechanical strength
  • RU8 system for elevated board stacking
Series
V
  • HSEC8-DV
  • HSEC8-RA
  • HSEC8-EM
  • HSEC8-PV
  • RU8
  • HSC8
  • HSEC8-DP
High-Speed (0.80 mm) Pitch Edge Card

1.00 mm Pitch High-Speed Edge Card1.00 mm Pitch High-Speed Edge Card

1.00 mm pitch high-speed edge card sockets with rugged Edge Rate® contacts and misalignment mitigation.

Features
  • Performance up to 14 GHz / 28 Gbps
  • Rugged Edge Rate® contacts decrease crosstalk and increase cycle life
  • 20 – 140 total pins
  • Accepts .062" (1.60 mm) thick cards
  • Optional weld tab and alignment pin
Series
V
  • HSEC1-DV
1.00 mm Pitch High-Speed Edge Card

Micro Edge Card SystemsMicro Edge Card Systems

Micro pitch edge card sockets in a variety of centerlines and orientations.

Features
  • Performance: Up to 14.5 GHz / 29 Gbps
  • Solutions for .062" (1.60 mm), and .093" (2.36 mm) thick cards
  • Choice of pitch: 0.50 mm, 0.635 mm, 0.80 mm, 1.00 mm, 1.27 mm, 2.00 mm
  • Vertical, right-angle, edge mount
  • Available in surface mount and through-hole
Series
V
  • MEC8-DV
  • MEC8-VP
  • MEC8-RA
  • MEC8-EM
  • MEC6-DV
  • MEC6-RA
  • MEC1
  • MEC1-RA
  • MEC1-EM
  • MECF-DV
  • MEC2-DV
  • MEC5-DV
  • MEC5-RA
Micro Edge Card Systems

PCI Express® Edge CardPCI Express® Edge Card

High-speed edge card sockets designed for mating with PCI Express® jumpers and extenders.

Features
  • PCI Express® compatible system
  • Supports 1, 4, 8 and 16 PCI Express® links
  • Vertical or right-angle PCB mount and card edge mount
  • 1.00 mm (.0394") pitch
  • Alignment pins
  • 7 GHz / pin (14 Gbps / pin)
  • Accepts 1.60 mm (.062") card
  • Polarized
Series
V
  • PCIE
  • PCIEC
  • PCRF
  • PCIE-LP
PCI Express® Edge Card

Micro TCA ConnectorsMicro TCA Connectors

Micro TCA edge card connector supports hot plugging and high-speed serial connections.

Features
  • Performance: Up to 12.0 GHz/24 Gbps
  • Compliant to µTCA™ standard architecture
  • Form/fit/function compatibility with Molex
  • Press-fit tails
  • Supports hot plugging and high-speed serial connections
  • Contacts: Up to 170 I/Os
  • Card slot: 1.60 mm (.063”)
Series
V
  • MTCA
Micro TCA Connectors

Mini Edge Card Guide SystemMini Edge Card System

Mini edge card sockets with optional card guides.

Features
  • Available with or without card guides
  • Various plating options
  • Contacts: Up to 50 I/Os
  • Card slot: .8mm (.0315”), 1.60 mm (.062”)
Series
V
  • MB1
Mini Edge Card Guide System

Serial ATA Link Card SocketSerial ATA Link Card Socket

High-speed micro plane socket accommodates variable mating card thickness.

Features
  • Tremendous board stacking, routing flexibility
  • Mount in pairs onsame side or opposite side for easy routing
  • SATALink™ compatible
  • Variable mating card thickness
  • Low profile
  • Large deflection BeCu contact
Series
V
  • SAL1
Serial ATA Link Card Socket

SFP, SFP+ SystemsSFP, SFP+ Systems

Transceiver interface sockets and cages, single or ganged.

Features
  • Mates with SFP, SFP+, XFP, or ZENPAK transceivers
  • Connectors and cage available
  • 20, 30, or 70 I/Os
  • 2x10 position for SFP, SFP+ transceivers
  • 2X10, 2X15, 2X35 for XENPAK and XFP transceivers
  • Press-fit or through-hole solder leads on cages
  • Available individually or as a kit (SFPK Series)
Series
V
  • MECT
  • SFPC
  • SFPK
SFP, SFP+ Systems

MSA Transceivers

MSA Transceivers

Edge card socket and cage interface in 2x10, 2x15 or 2x35 positions for mating with SFP, SFP+, XFP and XENPAK transceivers.


SFP, SFP+ SystemsSFP, SFP+ Systems

Transceiver interface sockets and cages, single or ganged.

Features
  • Mates with SFP, SFP+, XFP, or ZENPAK transceivers
  • Connectors and cage available
  • 20, 30, or 70 I/Os
  • 2x10 position for SFP, SFP+ transceivers
  • 2X10, 2X15, 2X35 for XENPAK and XFP transceivers
  • Press-fit or through-hole solder leads on cages
  • Available individually or as a kit (SFPK Series)
Series
V
  • MECT
  • SFPC
  • SFPK
SFP, SFP+ Systems

PCI Express®

PCI Express®

High-speed edge card sockets support one, four, eight and sixteen PCI Express® links and mate with PCI Express® cable assemblies.


PCI Express® Edge CardPCI Express®

High-speed edge card sockets designed for mating with PCI Express® jumpers and extenders.

Features
  • PCI Express® compatible system
  • Supports 1, 4, 8 and 16 PCI Express® links
  • Vertical or right-angle PCB mount and card edge mount
  • 1.00 mm (.0394") pitch
  • Alignment pins
  • 7 GHz / pin (14 Gbps / pin)
  • Accepts 1.60 mm (.062") card
  • Polarized
Series
V
  • PCIE
  • PCIEC
  • PCRF
  • PCIE-LP
PCI Express® Edge Card

One of the biggest events in the FPGA/SoC ecosystem is the annual Xilinx Developers Forum (XDF). XDF connects software developers and system designers to the deep expertise of Xilinx engineers, partners, and industry leaders. XDF takes place in three locations this year.  Samtec ...
Samtec performs several tests in-house as part of our qualification testing on a product series; including Low Level Contact Resistance (LLCR). It measures the amount of resistance in a position on a part. LLCR is used in combination with several other tests to track the overall ...
Makers of Louisville and Southern Indiana – Assemble! Obviously, the Samtec blog team has been watching too many superhero and Ron Burgundy movies.  However, the point still remains that this weekend marks a busy schedule for the maker community in the Kentuckiana area. Count’em....
In August we rolled out several updates with our continued support of industry standards, updated our homepage to feature Silicon-to-Silicon content and made a highly requested update to our product detail pages to show pricing and distributor stock. Here are the major updates to...
One Up Studio is a hardware design engineering provider with a focus on signal integrity, and not coincidentally, a Samtec customer. I caught up with Paul Monar, the owner, to pick his brain about some interesting design challenges he faces at One Up and his connector system sele...
View Full Site