This site uses cookies and other website monitoring technologies to assist with website functions and with our promotional and marketing efforts. By clicking Accept, you consent to the terms in our recently updated Privacy Notice and Policy Manual.
Accept Decline

Panel and I/O

High-speed optical, low skew pair copper and sealed IP68/IP67 systems for rugged, panel-to-panel applications.

High-Speed I/O Systems

High-Speed I/O Systems

High-speed optical and low skew pair copper I/O assemblies with rugged latching systems and shielded EMI protection for rugged, panel-to-panel applications. Assemblies include HyperTransport™ HT 3.1 performance on the industry’s densest I/O system, micro pitch design for board space savings, and SFP+ jumpers up to 20 Gbps data transmission.


Firefly™ Micro Flyover System™FireFly™ Micro Flyover System™

Future-proof system with interchangeability of FireFly™ copper and optical using the same micro connector system for up to 28 Gbps per lane.

Features
  • High-speed performance to 28 Gbps per lane
  • x4 and x12 designs
  • Variety of integral heat sink and End 2 options
  • Interchangeability of copper and optical
  • Micro rugged two-piece connector
  • Extended temperature and PCIe®-Over-Fiber solutions
Series
V
  • ECUE
  • ECUO
  • ETUO
  • FIK-FIREFLY-XX
  • PCOA
  • PCUE
  • PCUO
  • UCC8
  • UEC5-1
  • UEC5-2
Firefly™ Micro Flyover System™

PCIe® Optical Cable SystemPCIe® Active Optical Cable System

High-speed active optical cable assemblies supporting PCIe® Gen 3 with a cable reach to 100 meters.

Features
  • Four independent, full-duplex optical channels
  • PCIe® x4 and x8 form factors
  • Supports Gen 1, Gen 2 and Gen 3 data rates
  • Lightweight 3.00 mm diameter cable up to 300 meters
  • Full active optical cables with host and target
  • Half active optical cables with MTP end option
  • Direct replacement for passive or active copper cables
  • Supports PCIe® auxiliary signaling (CPWRON, CPERST#, CPRSNT#, CWAKE#)
  • Sideband support
  • PCIEA Series adaptor card is recommended to mate with Samtec's PCIEO Series assembly
Series
V
  • PCIEO
PCIe® Optical Cable System

Eye Speed® I/OEye Speed® I/O

Rugged high-speed cable systems feature a positive latching system and support multiple protocols.

Features
  • Performance to 25.5 Gbps for equalized cable (1.00 m)
  • Equalized option increases usable cable length and data rate
  • Small form factor for space saving applications
  • Micro rugged latching system
  • Shielded housing for EMI protection or sealed cable for IP68 applications
  • Supports SAS, SATA, Fibre Channel, Ethernet, PCIe® and InfiniBand™ protocols
  • High-reliability Edge Rate® contacts
Series
V
  • EPLSP
  • ERC
  • ERI8
  • RCH
  • RPBH
Eye Speed® I/O

Eye Speed® HDEye Speed® HD High-Speed I/O Systems

Ultra high-density, high-speed cable system with HyperTransport™ HT3.1 performance, designed for rugged applications and EMI protection.

Features
  • Superior signal integrity with HyperTransport HT3.1 performance
  • Industry's densest I/O cable system
  • Rugged latching system
  • Shielded for EMI protection
  • Cable, connector, and cage available
  • Rugged design
Series
V
  • HDC
  • HDI6
  • HDLSP
Eye Speed® HD

SFPSFP+ Cable System

Samtec's SFP+ system includes a panel mounted connector and jumper cable for high-speed applications.

Features
  • Performance to 10 Gbps
  • SFP+ compatible
  • Cables, connector and cages available
  • Connector and cage kits available
  • Single and multi port cages available
Series
V
  • MECT
  • SFPC
  • SFPE
  • SFPK
SFP

USB CableUSB Board Interconnects and Cable Assemblies

Samtec's USB systems feature both board level connectors and rugged overmold cables.

Features
  • USB and Mini USB
  • Various orientations, types, terminations
  • Rugged options available
  • Rugged overmold cables with various end options
  • 2.0 version available
  • High-cycles
Series
V
  • MUSB
  • MUSBS
  • SPM
  • USB-A
  • USB-AM
  • USB-B
  • USBR-A
  • USBR-B
USB Cable

Sealed Circular and Rectangular

Sealed Circular and Rectangular

IP67/IP68 dust and water protected systems and components ideal for high reliability in rugged applications. Sealed systems include bayonet circulars in 12 mm, 16 mm or 22 mm shell sizes, a miniature push-pull latching cable assembly, as well as Ethernet and USB signal assemblies.


AccliMate™ Bayonet Sealed CircularsAccliMate™ Bayonet Sealed Circulars

Tested to IP68 for dust and water applications.

Features
  • Three standard shell sizes: 12.00 mm, 16.00 mm and 22.00 mm
  • Metal, overmolded plastic or field termination plastic housings
  • Signal, power and combinations available
  • Easily build a standard or customized assembly online
Series
V
  • ACP-12
  • ACP-16
  • ACP-22
  • ACPK-12
  • ACPK-16
  • ACPK-22
  • ACR-12
  • ACR-16
  • ACR-22
  • ACRK-12
  • ACRK-16
  • ACRK-22
AccliMate™ Bayonet Sealed Circulars

AccliMate™ Sealed RectangularsAccliMate™ Sealed Rectangulars

Spacing saving rectangular design, tested to IP68 for dust and water.

Features
  • Space saving rectangular design
  • Maximum density for low profile 1U sealed applications
  • Ethernet and USB signal systems
  • Easily build a standard or customized assembly online
Series
V
  • ERI8
  • RCE
  • RCEF
  • RCH
  • RCU
  • RPBE
  • RPBH
  • RPBU
  • RPCE
  • RPCU
AccliMate™ Sealed Rectangulars

AccliMate™ Threaded CircularsAccliMate™ Threaded Circulars

Tested to IP68 for dust and water applications.

Features
  • Rugged overmold construction
  • Available as Mini USB, USB, and Ethernet systems
  • Ethernet version available for field termination
  • Dust caps available
Series
V
  • SCPE
  • SCPFE
  • SCPU
  • SCRE
  • SCRES
  • SCRU
  • SCRUS
AccliMate™ Threaded Circulars

AccliMate™ Mini Push-PullAccliMate™ Mini Push-Pull Systems

Tested to IP67 for dust and water applications.

Features
  • Lightweight plastic system
  • Rugged push-pull latching
  • Intermateable with Hirose HR30
  • Polarizing keys
  • Visual alignment indicators
  • Cable-to-cable or cable-to-panel solutions
Series
V
  • CC393
  • MCP
  • MCPK
  • MCR
  • MCRK
  • TC114
AccliMate™ Mini Push-Pull

AccliMate™ Crimp Sealed Bayonet CircularsAccliMate™ Crimp Sealed Bayonet Circulars

Samtec's AccliMate™ IP68 crimp sealed bayonet systems offer a cost-effective solution with optional metal shielding for cable-to-cable or cable-to-panel applications.

Features
  • Cost effective solution
  • Bayonet latching
  • Metal or plastic shell
  • Choice of terminal or socket
  • Cable-to-panel solutions
  • Field termination kits available
  • Dust caps available
Series
V
  • CCP-12
  • CCR-12
  • CCRB-12
AccliMate™ Crimp Sealed Bayonet Circulars

USB Interfaces

USB Interfaces

Standard, rugged and sealed USB or Mini USB 2.0 interfaces with choice of Type A, Type B and Type AM.


USB Board Interconnects and Cable AssembliesUSB Board Interconnects and Cable Assemblies

Samtec's USB systems feature both board level connectors and rugged overmold cables.

Features
  • USB and Mini USB
  • Various orientations, types, terminations
  • Rugged options available
  • Rugged overmold cables with various end options
  • 2.0 version available
  • High-cycles
Series
V
  • MUSB
  • MUSBS
  • SPM
  • USB-A
  • USB-AM
  • USB-B
  • USBR-A
  • USBR-B
USB Board Interconnects and Cable Assemblies

It’s been over a year since we last updated the Samtec homepage. As you may have already noticed, we recently took some time to refresh it. You can see a comparison below of the old homepage (top), vs the new homepage (bottom). The new update puts more attention on our high speed...
If you manufacture overseas and ship into the U.S.A, you may have a longer waiting time in Customs than you would prefer.  Some of this waiting time could be eliminated by becoming part of the Customs Trade Partnership Against Terrorism (C-TPAT), one layer of the U.S. Customs and...
Just about everybody wishes they had more time to pursue a hobby or a side project.  Some aspire to be painters or furniture makers.  Others like to rebuild cars.  Even others enjoy electronics in any form. The Maker Movement attracts and caters to tinkerers, hobbyists, students ...
Demand For High Data Rate As the need for bandwidth continues to increase, so does the need for higher data rates within a system. What was once one to three Gbps, then moved to 4 to 8 Gbps, and now we are approaching 28 Gbps and looking forward to 56 G. This trend was recently [...
Samtec is pleased to announce the new Silicon-to-Silicon Application Solutions Guide. This updated guide details the evolution of Samtec technologies, products and technical support available for next-gen system data rates. 56 Gbps PAM4. 56 Gbps NRZ. 112 Gbps PAM4. Whatever the d...
View Full Site