High-Speed Assemblies

High-speed cable assemblies with micro coax and twinax cable, for differential and single-ended applications. Assemblies include future-proof, high-density array, integral ground plane, hermaphroditic, rugged Edge Rate® and high-speed PCI Express® systems.


AcceleRate®AcceleRate® Slim Body Direct Attach Cable Assemblies

AcceleRate® is the industry’s slimmest cable system with direct attach technology and ultra low skew twinax cable for 56 Gbps PAM4 speeds.

Features
  • Incredibly slim 7.6 mm width
  • High-density 2-row design
  • 34 AWG, 100 Ω Eye Speed® ultra low skew twinax cable
  • 8 and 16 differential pair configurations
  • Two rows of high-density contacts directly soldered to the cable
  • Improved signal integrity by eliminating transition board and its variability
Series
V
  • ARC6
  • ARF6
AcceleRate®

Firefly™ Micro Flyover System™FireFly™ Micro Flyover System™

Future-proof system with interchangeability of FireFly™ copper and optical using the same micro connector system for up to 28 Gbps per lane.

Features
  • High-speed performance to 28 Gbps per lane
  • x4 and x12 designs
  • Variety of integral heat sink and End 2 options
  • Interchangeability of copper and optical
  • Micro rugged two-piece connector
  • Extended temperature and PCIe®-Over-Fiber solutions
Series
V
  • ECUE
  • ECUO
  • ETUO
  • FIK-FIREFLY-XX
  • PCOA
  • PCUE
  • PCUO
  • UCC8
  • UEC5-1
  • UEC5-2
Firefly™ Micro Flyover System™

Flyover QSFP28 Cable SystemsFlyover QSFP28 Cable Systems

These direct attach flyover QSFP28 cable assemblies improve signal integrity and increase signal path length at higher data rates.

Features
  • Compatible with all MSA QSFP pluggables
  • 4 or 8 channel systems
  • Eye Speed® 100 ohm twinax cable
  • Press-fit tails for low speed signals/power to PCB
  • No re-timers required for reduced cost and power consumption
  • Improved thermal dissipation by allowing ICs to be placed in preferred locations
  • Multiple end 2 options available
  • Belly-to-belly mating for maximum density (FQSFP-DD Series)
Series
V
  • FQSFP
  • FQSFP-DD
  • HS-QSFP
  • LP-FQSFP
  • QSFP8
  • QSFPC
  • QSFPC-PF
  • QSFPK-PF
Flyover QSFP28 Cable Systems

Direct Connect Cable SystemDirect Connect Cable System

High-speed, low cost cable assembly with press-fit termination directly to the PCB board.

Features
  • Press fit termination to the PCB board
  • Ultra low 3 mm profile
  • Supports and surpasses PCIe® Gen 3 speed at 2 meters
  • 100 ohm differential pair signal routing
  • 30 AWG twinax ribbon cable
Series
V
  • DCH
Direct Connect Cable System

NovaRay™NOVARAY™ 112 Gbps PAM4, Extreme Density Arrays

NovaRay™ combines extreme density and performance for 112 Gbps PAM4 per channel in 40% less space than traditional arrays.

Features
  • 112 Gbps PAM4 per channel
  • 4.0 Tbps aggregate data rate - 9 IEEE 400G channels
  • Innovative, fully shielded differential pair design enables extremely low crosstalk (to 40 GHz) and tight impedance control
  • 112 differential pairs per square inch
  • Two points of contact ensure a more reliable connection
  • 92 Ω solution addresses both 85 Ω and 100 Ω applications
Series
V
  • NVAC
  • NVAF
  • NVAM
  • NVAM-C
NovaRay™

Q Series®Q Series® High-Speed Cable Assemblies

These high-speed cable assemblies feature an integral ground/power plane, micro coax and micro twinax cable.

Features
  • Performance to 20.00 Gbps for 0.25 m
  • Surface mount, edge mount or panel mount terminations
  • 50 ohm single-ended and 100 ohm differential pair signal routing
  • Rugged screw mounts or retention pin options
Series
V
  • 6QCD
  • 6QDP
  • 6QDPS
  • EQCD
  • EQDP
  • HQCD
  • HQDP
  • QSE
  • QSE-DP
  • QSH
  • QSH-DP
  • QTE
  • QTE-DP
  • QTH
  • QTH-DP
Q Series®

SEARAY™SEARAY™ High-Speed Cable Assemblies

These high-speed, high-density array cable assemblies feature micro coax cable and rugged Edge Rate® contacts.

Features
  • Performance to 16.00 Gbps for 0.25 m
  • Edge Rate® contacts reduce broadside coupling
  • Positive latching system
  • Terminal end options
  • Designed for rugged micro pitch applications
  • 36 AWG coax high-speed cable
  • 50 ohm single-ended signal routing
Series
V
  • SEAC
  • SEAF
  • SEAF-RA
SEARAY™

SEARAY™ 0.80 mmSEARAY™ 0.80 mm Pitch Ultra High-Density Array Cable Assemblies

These ultra high-density, high-speed array cable assemblies feature micro coax cable and rugged Edge Rate® contacts.

Features
  • Performance to 35.00 Gbps
  • 50% board space savings versus .050" (1.27 mm) pitch SEARAY™
  • Edge Rate® contacts reduce broadside coupling
  • 50 ohm single-ended signal routing
  • Supports PCIe® Gen 3 and SAS3 protocols
  • Designed for rugged micro pitch applications
  • 34 AWG micro ribbon coax cable
  • Up to 300 I/Os
  • 8 and 10 row designs
Series
V
  • ESCA
  • SEAF8
  • SEAM8
SEARAY™ 0.80 mm

Edge Rate®Edge Rate® High-Speed Cable Assemblies

These high-speed cable assemblies feature rugged Edge Rate® contacts and Eye Speed® micro coax or twinax cable.

Features
  • Performance to 15.00 Gbps for 0.25 m
  • 50 ohm single-ended and 100 ohm differential pair signal routing
  • Designed for rugged micro pitch applications
  • Edge Rate® contacts reduce broadside coupling
  • Latching system available
  • Hot swappable
Series
V
  • ERCD
  • ERDP
  • ERF8
  • ERM8
Help Me Choose?
Edge Rate®

Edge Card Cable SystemsEdge Card Twinax High-Speed Cable Assemblies

These high-speed cable assemblies feature Eye Speed® twinax cable for optimized performance.

Features
  • Performance to 16 Gbps
  • 100 ohm differential pair signal routing
  • Micro 0.50 mm and 0.80 mm pitch
  • .062" (1.60 mm) thick card
  • Rugged metal latching and shielding
  • Vertical and right-angle PCB connectors
Series
V
  • ECDP
  • FCDP-DV
  • FCDP-RA
  • FEDP
  • HSEC8-DV
Edge Card Cable Systems

PCI Express®PCI Express® High-Speed Cable Assemblies

High-speed jumper cables support one, four, eight and sixteen PCI Express® links.

Features
  • Performance to 9.80 Gbps for 0.25 m
  • Supports 1, 4, 8 and 16 PCI Express® links
  • Standard positions of 36, 64, 98 and 164
  • 30 AWG standard ribbon cable and shielded twinax cable
Series
V
  • PCIE
  • PCIEC
  • PCIE-LP
Help Me Choose?
PCI Express®

Q Rate®Q Rate® High-Speed Cable Assemblies

These high-speed cable assemblies feature a ground plane, micro coax or twinax cable and rugged Edge Rate® contacts.

Features
  • Performance to 8.00 Gbps for 0.25 m
  • 50 ohm single-ended and 100 ohm differential pair signal routing
  • Edge Rate® contacts reduce broadside coupling
  • Slim body design
  • 32 AWG twinax and 34 AWG coax high-speed cable
Series
V
  • EQRD
  • EQRP
  • QRF8
  • QRF8-DP
  • QRM8
  • QRM8-DP
Q Rate®

Razor Beam™Razor Beam™ High-Speed Cable Assemblies

These micro rugged, high-speed cable assemblies feature Eye Speed® micro coax cable.

Features
  • 50 ohm single-ended signal routing
  • 38 AWG micro ribbon coax cable
  • Rugged screw down option
  • Vertical or right-angle end options
  • 0.50 mm (.0197") pitch
Series
V
  • HLCD
  • LSHM
Razor Beam™

Z-Ray®Z-Ray® Ultra Low Profile Cable Assemblies

These ultra low profile cable assemblies feature Eye Speed® twinax cable and mating board level interposer to achieve 28+ Gbps high-speed performance.

Features
  • 34 AWG twinax ribbon cable
  • 0.80 mm pitch
  • 8 or 16 pairs
  • 100 ohm signal routing
  • Choice of wiring options
  • Edge card option for end 2
  • Rugged metal cage for mating board level interposer
Series
V
  • ZCC
  • ZCI
  • ZRDP
Z-Ray®

Low Cost CoaxLow Cost Coax

Low cost, high-performance micro coax cable assemblies.

Features
  • 50 ohm single-ended signal routing
  • 38 AWG micro coax cable
  • Compact design for space saving applications
Series
V
  • FCF8
  • FCS8
Low Cost Coax

Shielded Twisted Pair CableShielded Twisted Pair Cable System

High-speed shielded twisted pair cable assembly for 100 ohm applications.

Features
  • 100 ohm signal routing
  • 28 AWG shielded twisted pair cable
  • Terminal and socket end options available
  • Choice of cable length
Series
V
  • C28S
  • CJT-BH
  • CJT-TH
Shielded Twisted Pair Cable

A key component of any high-speed signal path is the interconnect.  Design engineers must identify the right connector (or connectors) and the best performance for the application. At 56 Gbps PAM4 data rates (and higher), connector selection becomes more challenging. Interconnect...
It’s been over a year since we last updated the Samtec homepage. As you may have already noticed, we recently took some time to refresh it. You can see a comparison below of the old homepage (top), vs the new homepage (bottom). The new update puts more attention on our high speed...
If you manufacture overseas and ship into the U.S.A, you may have a longer waiting time in Customs than you would prefer.  Some of this waiting time could be eliminated by becoming part of the Customs Trade Partnership Against Terrorism (C-TPAT), one layer of the U.S. Customs and...
Just about everybody wishes they had more time to pursue a hobby or a side project.  Some aspire to be painters or furniture makers.  Others like to rebuild cars.  Even others enjoy electronics in any form. The Maker Movement attracts and caters to tinkerers, hobbyists, students ...
Demand For High Data Rate As the need for bandwidth continues to increase, so does the need for higher data rates within a system. What was once one to three Gbps, then moved to 4 to 8 Gbps, and now we are approaching 28 Gbps and looking forward to 56 G. This trend was recently [...
View Full Site