Precision RF

Wide variety of Precision RF Interconnects and Cables for high-performance testing starting at 34 GHz (3.50 mm). 40 GHz solutions, 2.92 mm and SMP, available as board-level interconnects and as high-performance microwave cable end options, with 2.40 mm available soon. 65 GHz solutions are in development. In addition, Samtec has the resources and willingness to provide technical support for launch optimization, simulations, and test measurements. This is supported by our RF Technical Group (RFTechnicalGroup@samtec.com).


2.92 mm Precision RF, 50 Ohm2.92 mm Precision RF, 50 Ohm

High-frequency Precision RF interconnects to 40 GHz

Features
  • Performance up to 40 GHz
  • Compression mount jack with 2-hole flange in various board thicknesses
  • 23 AWG solid dielectric low loss microwave cable with additional copper shielding
Series
V
  • 292-CA
  • 292-CM
  • RF23C
2.92 mm Precision RF, 50 Ohm

SMP Precision RF, 50 OhmSMP Precision RF, 50 Ohm

High-frequency Precision RF interconnects to 40 GHz

Features
  • Optional bullet adaptors in two standard lengths
  • Performance up to 40 GHz
  • Compensates for misalignment in X and Y directions
  • RG 405 (.086" DIA) semi-flexible or 25 AWG rugged solid dielectric microwave cable termination
  • Interfaces for tight, more secure connections
Series
V
  • SMP-CA
  • RF405
  • RF25S
  • SMP-B
  • SMP-EM
  • SMP-TH
SMP Precision RF, 50 Ohm

High-Frequency 50 Ohm CablesHigh-Frequency 50 Ohm Cable Assemblies

High-performance, low loss microwave or hand-formable semi-flexible cables.

Features
  • Performance to 50 GHz (to 65 GHz in development) with high-performance precision interconnects
  • 23 or 25 AWG, solid dielectric microwave cables
  • Hand-formable, semi-flexible cables at .086" or .141" DIA
  • 28 AWG, flexible .047" DIA cable with U.FL compatible plug to 500 cycles (HMHF1)
  • Visit samtec.com/BullsEye for high-performance test array solutions
Series
V
  • RF402
  • RF405
  • RF047
  • RF23S
  • RF25S
  • RF23C
High-Frequency 50 Ohm Cables

Bulls Eye®Bulls Eye® RF High-Performance Test to 50 GHz

The high-density array designs and advanced cabling solutions within Samtec’s Bulls Eye® product family enable optimized performance, now to 50 GHz. Compression interface, small footprint and high cycle count make Bulls Eye® ideal for high-performance test applications.

Features
  • 50 GHz and 20 GHz high-performance test point systems (to 65 GHz in development)
  • Compression interface to the board for easy on/off and eliminate soldering costs
  • Small footprint design significantly saves space on the board
  • Microstrip (50 GHz) or stripline (50 & 20 GHz) PCB transmission
  • RF Technical Group: dedicated RF engineers provide personal support for meeting specific RF challenges
Series
V
  • BE40A
  • BDRA
  • BQRA
Bulls Eye®

3.50 mm Precision RF, 50 Ohm3.50 mm Precision RF, 50 Ohm

High-frequency Precision RF interconnects to 34 GHz

Features
  • Performance to 34 GHz
  • End option on 23 AWG solid dielectric low loss microwave cable (RF23S)
  • Board level edge mount upon request
Series
V
  • RF23S
3.50 mm Precision RF, 50 Ohm

2.40 mm Precision RF, 50 Ohm2.40 mm Precision RF, 50 Ohm

High-frequency Precision RF interconnects to 50 GHz

Features
  • Coming Soon. Contact RFTechnicalGroup@samtec.com for more details.
  • Performance up to 50 GHz
  • Available soon as a cable termination on RF23C Series
  • Board level interconnects in development
Series
V
2.40 mm Precision RF, 50 Ohm

In July we rolled out several new content updates to the website, as well as a brand new streamlined checkout experience. We also made some updates to the recently released FSE locator tool to make it far easier to find your local Samtec FSE. Here are the major web updates for Ju...
Chances are likely you have seen it, and even see it more than once per day. You can find their logo on just about every power cord of a consumer product alongside other standards, but what is UL testing and why do we need it? What is Underwriters Laboratories? Underwriters Labor...
Cobalt Digital is a US company that designs and manufactures electronic equipment for the HD & 4K television production and broadcast markets. I recently spoke with Jesse Foster, Cobalt Digital’s VP of Marketing and Strategy, about the company, their industry, and the design chal...
Our friends at Signal Integrity Journal recently reported Samtec’s and Molex’s collaboration on high speed, next-generation data centers.  The complete article is worth the read, but here’s the Cliff’s Notes version: SIJ referred to the Licensed Source Agreement for the Samtec Tw...
Consumer access to embedded computing platforms is a recent phenomenon.  For decades, enterprises, academia and research institutions had the resources to leverage these easy-to-use platforms In recent years, open-source electronics platforms like Raspberry Pi and Arduino have ch...
View Full Site